Article on CA glue.....

[Wally Dickerman]

I wrote an article for my club newsletter on CA glue. I did some research to get my facts straight. If you're interested check it out on the articles forum. Comments welcome......

[Steve Schlumpf]

Wally - I look forward to reading your article but until Aaron gets it published to the Front Page of the site, the general public can not view it.

[Bill Blasic]

Wally how about posting it on the WoW site?

[James Combs]

Good article Wally, pretty much covers anything a new user would need to know from a general perspective. Most previous info threads on CA have dealt with applying it.

[Ronald Campbell]

Wally I received a copy from the club and thank you for the information. Looking forward to seeing you again this winter. Will arrive Dec 15th or so. I will be in touch.

[robert baccus]

Sounds like a good article Wally. Where can the ignorant and unwashed find it?

[Wally Dickerman]

Sounds like a good article Wally. Where can the ignorant and unwashed find it?

Go to Authors Forum on the forums list.

[Alan Gan]

Go to Authors Forum on the forums list.


I do not have authorization...?

Alan Gan, you do not have permission to access this page. This could be due to one of several reasons:


Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

[Keith Outten]

http://www.sawmillcreek.org/content.php?151-Using-CA-Glue-in-Woodturning

[Dale Winburn]

http://www.sawmillcreek.org/showthread.php?223863-Using-CA-Glue-in-Woodturning

I don't have permission to access the page.

[Jim Tobias]

http://www.sawmillcreek.org/showthread.php?223863-Using-CA-Glue-in-Woodturning

Says I do not have permission.

Jim

[Peter Lamb]

I do not have permission either

[Kyle Iwamoto]

Private Forum. How do we join?

[Mel Fulks]

Jim it wouldn't let me in either.

[Steve Schlumpf]

Guys... for now, ONLY authors can use the link that Keith provided.

Wally's article will not be available for the general public to read until it is published and that is done by Aaron. The Author's Forum is just a place for anyone who wants to write an article to piece together their information. Once they are happy with the article, Aaron formats it and posts it to the Articles section of the site. Anyone can become an author but the forum is closed to non-authors so that they can have privacy to compile their article without having folks comment on a work in progress.

[Sid Matheny]

Using Keith's link, I do not have permission either.

Sid

[Keith Outten]

I'll ask Aaron to take a look,

[Jim Meyer]

I do not have permission also Jim

[John Schlueter]

Now that we're all excited about reading the article, but can't access it, how will we know when it's posted?

[Steve Schlumpf]

I will post about it and include a link to the article!

[Tom Giacomo]

I don't know I got right on. Maybe I'm the chosen one.

[Keith Outten]

OK, try again.

I'm not familiar with the procedure required to publish articles but I may have it approved this time. Since Aaron is to busy I will have to get some training on how to do this properly.

http://www.sawmillcreek.org/content.php?151-Using-CA-Glue-in-Woodturning

[Joe Kieve]

Can't explain why but Keith's link opened right up for me. Go figure. Excellent article Wally. Gotta take mine out of the frige and put in the freezer.

[James Combs]

OK, try again.

I'm not familiar with the procedure required to publish articles but I may have it approved this time. Since Aaron is to busy I will have to get some training on how to do this properly.

http://www.sawmillcreek.org/content.php?151-Using-CA-Glue-in-Woodturning
Hi Keith, does this mean that you will be looking at publishing the other 25+ unpublished submissions in the authors forum, no pressure just curious,:).