ken hatch
11-15-2014, 1:56 PM
Several months ago after tiring of cobbling together sticking boards and/or using the bench top for working thin pieces I took a couple of chunks of 19mm Baltic Birch, a Sapele off cut, and some hardware and made a useable sticking board. It had been hanging on the wall ever since.
SWMBO requested a picture frame for one of her mosaics so the sticking board finally had a chance to come off the wall this AM. It was pretty nice to use, now the question is....why did it take so long to make a good one?
http://i257.photobucket.com/albums/hh222/VTXAZ/stickingBoardD_zpsfdc9133a.jpg
BTW, I'm killing time while the hide glue warms up enough to finish the picture frame.
SWMBO requested a picture frame for one of her mosaics so the sticking board finally had a chance to come off the wall this AM. It was pretty nice to use, now the question is....why did it take so long to make a good one?
http://i257.photobucket.com/albums/hh222/VTXAZ/stickingBoardD_zpsfdc9133a.jpg
BTW, I'm killing time while the hide glue warms up enough to finish the picture frame.