Jerry Thompson
11-06-2014, 9:29 AM
I have been able to adjust the left 45d bevel and zero out the blade relative to the table. The right side 45d bevel is another story. The adjustment bolt is on the right underneath the bevel degree scale. I can turn it and the indicator mark will only move a few degrees. At the rate of progress in turning the bolt it seems as if the bolt would come out completely before it even approached the desired 45d.
It is seldom I use a bevel cut on either side but I have a project coming up that bevels to both side would be beneficial.
Thank you for any help.
It is seldom I use a bevel cut on either side but I have a project coming up that bevels to both side would be beneficial.
Thank you for any help.