PDA

View Full Version : 2‐butoxyethanol



Brian Deakin
10-23-2014, 2:07 PM
I have found the following information about the composition of Simplegreen and TREND CLEAN/500 Tool & Bit Cleaner

https://www.machinemart.co.uk/documents/msds_clean500-uk.pdf


and

http://simplegreen.com/pdfs/MSDS_EN-US_AllPurposeCleaner.pdf


So my question

Would it be possible /sensible /legal/safe

to make you own tool cleaning solution by purchasing ( if possible /legal /safe )

a bottle of 2‐butoxyethanol and diluting it to a 4% solution

In the United Kingdom I found the follwing link

http://mistralni.co.uk/products/2-butoxyethanol-ethylene-glycol-butyl-ether-butyl

So a 1 litre bottle of this would make 25000 ml (2.5litres) of blade cleaner or 47 times the volume of the Trend product


regards Brian

Lee Schierer
10-23-2014, 5:06 PM
It may be possible, but the formula given by the MSDS sheets you found aren't an exact formula. It probably is legal as long as you don't sell it as Simple Green. It would only be sensible if you can purchase the ingredients and make the mixture for less than you can buy it already mixed. Only a chemist gould tell you if mixing those ingredients poses and health or safety risk.

I suggest you do a search of the SMC archives to see past discussions on using Simple Green as a blade cleaner.

Tom M King
10-24-2014, 8:15 AM
It's not really scary stuff as far as I'm concerned, being the same cleaner in Formula 409, and Totally Awesome, but it is worth being aware that it was used in the cleanup of the Exxon Valdez spill, and a lot of the people using it all day ended up with severe nerve damage.

Brian Deakin
10-24-2014, 3:58 PM
It may be possible, but the formula given by the MSDS sheets you found aren't an exact formula. It probably is legal as long as you don't sell it as Simple Green. It would only be sensible if you can purchase the ingredients and make the mixture for less than you can buy it already mixed. Only a chemist gould tell you if mixing those ingredients poses and health or safety risk.

I suggest you do a search of the SMC archives to see past discussions on using Simple Green as a blade cleaner.


A huge thank youfor your reply

Notes

(1) if I make a 4% solution of 2‐butoxyethan0l (http://www.sawmillcreek.org/showthread.php?223047-2butoxyethanol&p=2325211#post2325211) by mixing it with water the cost of the solution is 1/47 the cost of a bottle of Trend tool and bit cleaner

(2) The link http://en.wikipedia.org/wiki/2-Butoxyethanol indicates 2-Butoxyethanol is miisible with water and gives other safty data

regards Brian