PDA

View Full Version : Walnut /walnut veneers suppliers UK



Mark Ward
10-22-2014, 5:30 PM
Hi, one for the UK contingent this one.
I'm after some laserable Walnut or a walnut veneer that is around 3mm thick. Do any of you guys have a suggested supplier that will be good to use?

Dave Sheldrake
10-22-2014, 6:05 PM
SLEC are pretty good.

cheers

Dave

Michael Hunter
10-22-2014, 7:31 PM
If 5mm is OK you could try Moran's Wood Components.
They sell "slats" about 4" wide and 2'6" long, pre finished with a sheen laquer. Not cheap but very good quality.
Not entirely sure if they do walnut (their catalogue is in the workshop and the website does not name the woods), but worth a try.

Mark Ward
10-23-2014, 5:21 AM
SLEC are pretty good.

cheers

Dave
Cheers, had never seen their site before, ta!
It's a shame the sheets are only 3" wide, could do with proper sheets that are around 400 x 600mm

If 5mm is OK you could try Moran's Wood Components.
They sell "slats" about 4" wide and 2'6" long, pre finished with a sheen laquer. Not cheap but very good quality.
Not entirely sure if they do walnut (their catalogue is in the workshop and the website does not name the woods), but worth a try.
Thanks Michael, I will have a look but was really needing it to be nearer to 3mm. Also as above, a shame it is only slats rather than decent sized sheets.