Dave Avery
10-18-2014, 12:21 PM
All,
Found an excellent article by Frank Pellow on replacing motor brushes on my non-functioning Rotex. Looked like a simple job. Remove 2 screws at the back of the housing and slide the housing back..... NOT. Anyone have any idea what I'm doing wrong? Many thanks in advance. Dave.
Found an excellent article by Frank Pellow on replacing motor brushes on my non-functioning Rotex. Looked like a simple job. Remove 2 screws at the back of the housing and slide the housing back..... NOT. Anyone have any idea what I'm doing wrong? Many thanks in advance. Dave.