Joe Kieve
10-11-2014, 11:50 AM
I need to cut a 10" X 10" hole in a piece of plywood. I'll be using my PC690 and a guide bushing. The OD of my bushing is 1/2" and using a 1/4" straight bit. I get the difference as 1/8" (1/2" minus 1/4" divided by 2). Pretty straightforward so far.
Do I cut my template 10" plus 1/8" or 10" plus 1/4"?? Can't seem to wrap my foggy brain around this. Guess I could cut one and find out but no need if you can help.
Thanks in advance for your help.
joe
Do I cut my template 10" plus 1/8" or 10" plus 1/4"?? Can't seem to wrap my foggy brain around this. Guess I could cut one and find out but no need if you can help.
Thanks in advance for your help.
joe