PDA

View Full Version : GCC Spirit Not Deleting File



David Sabot
10-11-2014, 10:36 AM
So I purchased a 2 year old, perfect condition GCC Spirit 40W machine. The tech from the engraving company updated the firmware and when I send something to the machine it will engrave fine, but then the machine locks up. I can't delete the file, I can't re-print the file, I can't move the carriage. I have to restart the machine. I've tried rolling back the firmware to no luck. I've tried using two different computers, still no luck. I've tried different files, nothing seems to work.

Scott Challoner
10-13-2014, 10:09 AM
I would try reloading the driver. I've had to do it few times.