extending the travels in the machine parameters-C02 laser

[anthony jude]

I have a 60 watt C02 laser, and was wondering if any one knows if the password on the parameters is a generic one? If so would anyone happen to know it? I need just another 1/4" of travel in one direction, and its there, just need to change it in the machine parameters itself.

Thanks for any help.

[Robert Schmiede]

Anthony, when you open the parameter box and it says enter password,are there dots in the password box. If there is enter your new parameters then press ok. Works on my generic 6090 laser.

[Jerome Stanek]

on my rdcam software the password is rd8888

[anthony jude]

Robert I will try that. honestly didn't pay attention.

Jerome, I am using lasercut 5.3 which came with the machine, so I don't know if that will work, but appreciate any help.

[Jerome Stanek]

I did extend my limits by about an inch each way you have to be careful so your head clears everything.