Dick Howard
05-26-2003, 3:53 PM
Got my griz 0555 bandsaw and after a couple of mistakes on the setup,(due to not reading all the instructions first) I got it all set up. First project was a finger board. Then decided to try a little resawing. Took a piece og oak 3/4 x2 1/2 x13 and cut a slice .o35 off it. Worked great till it passed the finger board, then it thinned down slightly. This was with the blade that came with the saw. Can't wait to see what it will do with a timberwolf designed for resawing. Im tickeled to death with the saw. Instructions were great if I had read them thru before starting.
Dick in Emmett, Idaho
Dick in Emmett, Idaho