PDA

View Full Version : Epilog Legend 24tt Won't Boot



Allan Wright
09-14-2014, 3:13 PM
I was in the middle of a job and my Legend 24TT stopped. The back light is on on the LCD, but nothing is displayed on it. I've tried unplugging it for a while and when turned on all I get is the back light on the LCD, nothing after that.

Any thoughts on how I should proceed before calling Epilog?

Bruce Volden
09-14-2014, 6:07 PM
Sounds like the mother board. I have the same machine and have installed 2 so far (past 10 years).

Bruce

Allan Wright
09-15-2014, 8:49 AM
Sounds like the mother board. I have the same machine and have installed 2 so far (past 10 years).

Bruce

Makes sense to me. I opened it up and there are red surface mount LEDs on it that are lit so I don't think it is the power supply.

How much does a motherboard cost?

Bruce Volden
09-15-2014, 9:39 AM
If I recall mine was ~$900?

Bruce

Allan Wright
09-15-2014, 10:07 AM
Ouch!

Thanks for the info Bruce - very helpful.

I'm always pleasantly surprised how helpful and knowledgable the Creekers are.


If I recall mine was ~$900?

Bruce

Allan Wright
09-15-2014, 10:23 AM
Bruce,

Have you ever looked into getting your tube recharged or replaced? I'm wondering if it's even still possible on these older units?

Allan

Joe Pelonio
09-15-2014, 2:25 PM
I'm on my 3rd tube, but (knocking on wood) have the original mother board from 2004. I have no idea what they cost now, but from Epilog the first was on warranty, the second $2,400, then I heard from one of their techs it had dropped to $1,100.

Allan Wright
09-15-2014, 3:04 PM
I'm on my 3rd tube, but (knocking on wood) have the original mother board from 2004. I have no idea what they cost now, but from Epilog the first was on warranty, the second $2,400, then I heard from one of their techs it had dropped to $1,100.

Thanks, the local repair guy quoted me $1000.00 for the replacement board so I guess they're still dropping in price. He also quoted me $1300.00 for a replacement rebuilt/refilled 35-watt tube which I thought was a bargain.

Allan Wright
09-16-2014, 5:02 PM
So here's what I see on the back side. 48V light (D11) doesn't light up. Possibly power supply issue?

296848