Lee Garrison
09-10-2014, 6:00 AM
I have a vision 24x24 phoenix controlled by a series 1 controller. I got it "broken" from DRMO with 2 controllers. I fixed what was wrong with it and have gotten 4 years out of it after it was retired as scrap. It was originally bought in 1995 or 1996. Vision won't do anything with it, they want 6k for a series 4 controller and can't tell me if it is even compatible with this old of a machine.
I need info on where i can possibly send this for repair, by a used working series 1 controller or a used series 2 or 3 controller.
I retrofitted a series 3 to the sister machine to this one it is a 12x16 phoenix i think...
Or if there is a semi easy retrofit for a diy controller using corel draw that would be great too.
thanks for any help you all can provide!
I need info on where i can possibly send this for repair, by a used working series 1 controller or a used series 2 or 3 controller.
I retrofitted a series 3 to the sister machine to this one it is a 12x16 phoenix i think...
Or if there is a semi easy retrofit for a diy controller using corel draw that would be great too.
thanks for any help you all can provide!