Keith Colson
08-24-2014, 4:24 AM
I needed to cut a really big sheet yesterday that had to hang out the front door of my VLS6.60 so I quickly made a door interlock override. I thought I would share it.
Here is the Corel X5 file.
295465
Here are some pictures. I used 10mm Acrylic and 1/4" magnets. They press fit into the holes and did not require glue but you could add some if you wanted.
295466
Here it is installed in the front door
295467
It seems to work well and being magnetic stows away inside the door for safe keeping. The part is symmetrical in x and y so does not require me to think about which way to fit it. I hope it is of some use to you.
Cheers
Keith
Here is the Corel X5 file.
295465
Here are some pictures. I used 10mm Acrylic and 1/4" magnets. They press fit into the holes and did not require glue but you could add some if you wanted.
295466
Here it is installed in the front door
295467
It seems to work well and being magnetic stows away inside the door for safe keeping. The part is symmetrical in x and y so does not require me to think about which way to fit it. I hope it is of some use to you.
Cheers
Keith