New Project - Push Through Drawer Cabinet with Trench Tray

[George Bokros]

Looking for some input. Wife saw this in a magazine and would like to have me make one. I have some sugar pine left from a project that is begging to be used and I think it will be a good material for this project. The wife doesn't want the one make to be as primitive as this.

I cannot find any plans for one so I am on my own to design and build. My question is the angle on the tray part, it looks to me to be ~ 60* angle from the horizontal, what do you guys think?

Thanks for the input.


George

[Dave Richards]

I think more like 75° or 80°. (10 or 15 off vertical)

I did a quick sketch at 75° and I think that would be the minimum. What are the dimensions?

[George Bokros]

I think more like 75° or 80°. (10 or 15 off vertical)

I did a quick sketch at 75° and I think that would be the minimum. What are the dimensions?

The only dimensions I have are overall. 22 3/4" wide, 11 1/2" tall and 7" deep.

Thanks Dave.

George

[Dave Richards]

What do you suppose for material thickness? And what would it be used for?

[George Bokros]

I am thinking 1/2" looks about right to me.

George.