Michael Heffernan
07-12-2014, 8:34 PM
I've used my DeWalt track saw a lot for sizing sheet goods. Been using the 48T blade that came with the saw. I started using it for straight line ripping hardwood, but obviously this isn't the blade for the job.
Any recommendations for a good 6-1/2", 20 mm arbor rip blade that is compatible with the DeWalt track saw. DeWalt only makes 48T and 40T blades. Freud's thin kerf rip blades look good, but expensive. Also, since it's a thin kerf, I'd have to replace the rubber strips on the tracks. Like to avoid that and get a blade with the same kerf.
Any recommendations for a good 6-1/2", 20 mm arbor rip blade that is compatible with the DeWalt track saw. DeWalt only makes 48T and 40T blades. Freud's thin kerf rip blades look good, but expensive. Also, since it's a thin kerf, I'd have to replace the rubber strips on the tracks. Like to avoid that and get a blade with the same kerf.