PDA

View Full Version : Curly Willow



Dennis Ford
07-09-2014, 8:21 PM
I don't turn willow unless it has character (this has plenty of character). It is 9-1/2" tall and 8" diameter, finished with lacquer. I do not sand the inside of most hollow forms but did sand inside this one some (Some areas were very soft and I did not get all the tear-out removed on the inside). Several views shown because it is different on each side. Comments and critiques welcome.

Tom Sherman
07-09-2014, 8:23 PM
Dennis that is a real nice piece of Willow. You have done it proud.

Glen Blanchard
07-09-2014, 9:12 PM
This piece is stunning. Almost appears to be gilded in areas. Nice job!

robert baccus
07-09-2014, 10:24 PM
Stunning wood and workmanship.

Michelle Rich
07-10-2014, 7:07 AM
thanks for all the views..quite a stunner from all sides. Super job..it's a beauty!

Bill Hensley
07-10-2014, 7:37 AM
This one has it all, wood character, form and finish. Well done!

David Delo
07-10-2014, 9:09 AM
Way beyond my pay grade. Outstanding piece, thanks for sharing.

Eric Gourieux
07-10-2014, 9:58 AM
That willow has lots of character! Your form is spot on!