Wood Screw Vendor Recommendation

[Mark Vedder]

Does anyone know of a good (online/mail-order) vendor for ordering wood screws? I'm in need of some unusually sized wood screws (#14 course thread 3/4" pan or round head) that my local hardware stores do not carry. I found a few online vendors, but they only sell in large quantities such as 1,000 screws for ~$75. Given I only need 8, a full thousand is a bit excessive and expensive. So I'm reaching out to see if anyone knows of a vendor that can provide what I need in a more "reasonable" quantity. Thanks.

[Erik Christensen]

McFeeley's is the best place on the web i have found for screws of all types

[Mark Vedder]

McFeeley's is the best place on the web i have found for screws of all types

Thanks. Unfortunately the shortest #14 wood screw they have is 1" and its a flat head. So my search continues... *sigh*

[Larry Browning]

Have you looked locally for a screw/fastener supplier? I live in a relatively small town and we have 2. They have every variety of screw you could ever imagine. Look in the yellow pages under "Screws"

[Mark Vedder]

Have you looked locally for a screw/fastener supplier? I live in a relatively small town and we have 2. They have every variety of screw you could ever imagine. Look in the yellow pages under "Screws"

I'll give that a try. I only checked numerous hardware stores, woodcraft, rockler, and the big boxes. I didn't think of any type of specialty store. I found some listed under "Fasteners". Thanks Larry.

[Scott Cenicola]

Does your town have an Ace hardware? I found some hard to find screws there a few times.

[Larry La Mont]

If you only need a few just get some #14 pan head sheet metal screws and cut them off to the desired length. You will need a pilot hole for something that big anyway, so the pointy end is not important.

[Rich Engelhardt]

Fastenal has these:

#14-10 x 3/4" Slotted Round Head Wood Screw, Brass SKU: 75451

They also have the same screw in stainless for about $5.00 each.

[Stew Hagerty]

Check with Bolt Depot
http://www.boltdepot.com/Default.aspx

[scott vroom]

Fastenal has a number of #14 x 3/4 stainless panhead screws for less than a dollar each.

(Tried to add link but it won't work on this site for some reason)

[Peter Quinn]

http://www.fastenersplus.com/14-x-3-4-black-phillips-pan-sheet-metal-screw-pkg-10.html?utm_source=google_shopping&gclid=CKKH_ueTu78CFW4Q7Aod7VwApg

These work in wood, not sure what your application is, but these are available in my local store, and with a thread that large they pretty much grab in anything.