Keith Hankins
07-06-2014, 10:43 PM
I recently needed an ogee foot pattern for a wine cabinet I'm making. I looked far and wide and found some things but they all seemed too big. I even tried to scale a few down in sketchup, but they all seemed to fat at the base to my liking.
Anyway, decided just to make one. So I finished it in Sketch-up and full size pattern in layout and printed them and put them on some hardboard and cut them out to put next to the cabinet to get a look at the diff versions.
Nothing like a mock-up to look at. So, If anybody needs an ogee foot like the one in the photo send me a message and I'll happily send you the sketch-up file and layout full scale pattern. I would post it here but I see the forum sells all attachments in a compilation DVD. I only insist it not be sold but given away.
292484
Anyway, decided just to make one. So I finished it in Sketch-up and full size pattern in layout and printed them and put them on some hardboard and cut them out to put next to the cabinet to get a look at the diff versions.
Nothing like a mock-up to look at. So, If anybody needs an ogee foot like the one in the photo send me a message and I'll happily send you the sketch-up file and layout full scale pattern. I would post it here but I see the forum sells all attachments in a compilation DVD. I only insist it not be sold but given away.
292484