Unisaw switch wiring

[Stephen Mcallister]

All:

I broke my own rule of labeling or taking a picture of how wires are connected when disassembling and now (several weeks later) I'm at a loss to which wires go to the right poles in my Unisaw power switch. I have a Unisaw model 34-802 with a 5hp motor. Attached is a picture of the switch. Can anyone help me with where the red, white, black and green wires attach? Thanks for all your help.

Steve

[Carroll Courtney]

There may be a diagram on the plate of the motor,sometimes a diagram is on the inside of the cover where all the wires go and on the inside of your LVC box.

[Bill ThompsonNM]

Try googling 'unisaw switch wiring'. Lots of hits and images. The leads are probably labeled the same even if the switch isn't the same model. Worked for me a few years back.