stool

[Joe Bradshaw]

A stool that I recently finished. The seat is bubinga and the legs are oak. Finish is high gloss tung oil. About 17" tall and the seat is 13 1/2" in dia. Cand C welcomed. Joe292348

[Jeff Gilfor]

Thank goodness. Being a physician in my day job, I though this post might be about something else.

very nice... Stool.

[Thomas Bennett]

Nice stool! How did you make it, drill the holes, etc? Can you show us a photo of it turned upside down? What is the angle of the legs to the seat?

[Michelle Rich]

I enjoy seeing useful turned items..thanks for sharing

[Joe Bradshaw]

Thomas, I turned the stool seat and legs on my lathe. I have a drilling jig for my drill press. The holes are drilled at a 10 degree angle. I first drill a 5/8" through hole. This hole is enlarged using a bridge reamer. I like to pre-finish everything before assembly. I am having a problem uploading files. Joe

[Mel Fulks]

A bubinga milking stool! Those guys , or maids, must have a strong union!

[Jak Kelly]

Nice job!!!
Looks good to me. Definitely something to be proud of.