fRED mCnEILL
06-22-2014, 1:00 AM
From time to time people asked about how to take the warp out of plywood.
I use a lot of sheets of ply with aluminum bonded to one side. Because of this it warps easily. Today I took a sheert out that was warped so I put it on the grass in the hot sun (i.e. 70 deg) with the wood face down on the grass and in about 1/2 hour the warp was gone.
Regards
Fred M
I use a lot of sheets of ply with aluminum bonded to one side. Because of this it warps easily. Today I took a sheert out that was warped so I put it on the grass in the hot sun (i.e. 70 deg) with the wood face down on the grass and in about 1/2 hour the warp was gone.
Regards
Fred M