PDA

View Full Version : Mattison 202 Ripsaw Belt Repair


Chris Stormer
06-20-2014, 2:17 PM
Can anybody direct me to someone who can replace a Mattison 202 Ripsaw belt?
peter gagliardi
06-20-2014, 2:24 PM
There are folks on OWWM who specialize in this type of vintage machinery, they are probably your best bet.
jack forsberg
06-20-2014, 8:41 PM
while i would general agree with peter about OWWM in the past the guy to take to is Stephen Thomas and you will not find him there at OWWM any longer. He is the only one i have every heard of rebuilding one of theses. Even Ben rock thinks its crazy to replace the chain.
You will find Steve here.

http://www.practicalmachinist.com/vb/woodworking-woodworking-machinery/
Scott T Smith
06-21-2014, 10:32 PM
Chris, I have a Mattison 202 in my shop. My "go-to" person for parts and advice is Marion Beck with Beck Machinery in Thomsaville, NC. He has a lot of parts in stock for the 202's and services the Mattison saws installed in a lot of the furniture companies in North Carolina.

His e-mail address is Marion Beck <noyboy@northstate.net> and his office number is 336.476.3979