Sorry old topic, but can't find it here on or google. Alt to Vinyl

[Clark Pace]

Hello,

I am cutting out shapes, and want to apply a colored layer top on the acrylic before I cut them.

I can of course lay the colored material afterwards and cut out the shape by hand, but I remember someone mentioning an alternative to vinyl. I have used polyester, but can only find a few metalic colors.

Anyone here remember?

[Robert Walters]

Could you just spray paint, then cut?

I also saw this:
Copper, bronze, gold, nickle,
imprintables DOT com/cut-only-heat-transfer-vinyl-special-effect



http://www.sawmillcreek.org/showthread.php?198307-PVC-free-heat-transfer-vinyl


(http://www.sawmillcreek.org/showthread.php?198307-PVC-free-heat-transfer-vinyl)

[Keith Colson]

Here is an alt to Vinyl that is made to go in the laser. You will need to find a local "laserables" supplier

LASERABLE SERIES - LASER ULTRA THINS

http://www.engravingsupplies.co.nz/engravers-store/ipi-laminate-laser/ultrathins.htm

Cheers
Keith

[Kev Williams]

You can get virtually ANYthing in vinyl- color-shift metallic colors, wood, carbon fiber, polished chrome & brass, sandblast-frost, reflector, heavy metalflake, hologram designs, rainbow-mirror, and any plain color you can imagine?

So- I'm curious as to why you'd like an alternative? :)

[Dave Sheldrake]

A lot of vinyls contain Chloride Kev, alternatives are safer I guess :)

cheers

Dave

[Joe Pelonio]

Yes, vinyl contains PVC and can destroy your machine and any life inhaling the fumes when cut, but a few pieces applied to acrylic with the transfer tape left on won't do damage. If it's a large quantity I;d definitely find an alternative. Krylon Fusion works, though I prefer to spray with One-Shot. For metallic I use the powders (actual metal) mixed into One-Shot waterborne clear then sprayed.