PDA

View Full Version : Wood ID help



Ricc Havens
05-28-2014, 2:14 PM
Just turned this coffee mug out of some scraps I had laying around. Sorry in advance on the poor lighting and picture quality. I'm on disability and can't afford a light box or a camera bet my iPhone!.

Before I put the finish coat on I want to write the wood species on the bottom along with my signature.

I know the light wood is maple. But not sure of the reddish wood. It's hard but cuts smoothly and sands to a nice finish.

Anyone have any thoughts on what type of wood it is??

Thanks
Ricc Havens
Elkhart, IN290278290279290280290281

Dennis Ford
05-28-2014, 4:46 PM
My guess is cherry.

Ricc Havens
05-28-2014, 5:06 PM
It didn't seem like other cherry I have turned and it didn't have the same smell - but I could be wrong :):)

Ricc

Tom Sherman
05-28-2014, 7:50 PM
Ricc, I'm thinking Cocobolo, or some other rosewood.

Harry Robinette
05-28-2014, 8:31 PM
I'm thinking more like Padauk.

Mike Hollingsworth
05-28-2014, 8:38 PM
one more for Cherry

David Coburn
05-29-2014, 7:52 AM
Since it didn't smell like Cherry I'll rule that one out... I'd also guess Padauk or maybe Jatoba.
david

Ricc Havens
05-29-2014, 10:10 AM
When turning it seemed denser than cherry that I had turned before. It's not as orange as the Padauk I have turned. It was actually a lot lighter in color but in the pic it has one coat of Watco danish oil. Definitely not cocobolo as I am allergic to the dust so it never enters my shop.

It might be Jatoba as David suggested. I checked google images and it looks very close. So unless anyone else has any suggestions I will assume it's jatoba.

Ricc

Barry Richardson
05-29-2014, 11:15 AM
Looks like Jatoba to me, aka Brazilian cherry, your description sound right too....

robert baccus
05-29-2014, 11:42 PM
Jatoba is a good guess for sure. One other might be red heart--a tropical.

Dave Cullen
06-02-2014, 2:40 PM
Maybe Bubinga?

robert baccus
06-02-2014, 10:29 PM
Try checking out Hobbitt house woods--a priceless reference.

Ricc Havens
06-03-2014, 12:52 PM
I will check it out

Thanks
Ricc