steve swartz
05-27-2014, 11:44 PM
I had an idea for a jig the other day and thought you guys might be able to give me some help on whether or not it might work or if I am going to become an accident looking for a place to happen.
I thought it might be possible to put a metal cutting blade in my table saw (those inexpensive blades that we used to use to cut rebar with a skil saw) and create a jig that slides in my table slots that will allow me to sharpen my planer blades. I was also wondering if it might be possible to create another sliding jig that will allow me to touch up my 10" saw blades. I would just be hitting the faces.
Let me know what you guys think. If you think I am crazy, don't be shy about letting me know.
I thought it might be possible to put a metal cutting blade in my table saw (those inexpensive blades that we used to use to cut rebar with a skil saw) and create a jig that slides in my table slots that will allow me to sharpen my planer blades. I was also wondering if it might be possible to create another sliding jig that will allow me to touch up my 10" saw blades. I would just be hitting the faces.
Let me know what you guys think. If you think I am crazy, don't be shy about letting me know.