Michele Rogers
05-26-2014, 6:47 PM
I am having an issue with my 5th generation laser.
It was working fine and half way through a raster project it quit. The tube stopped firing altogether I even tried a different job in vector cut and the tube doesn't fire. I walked through all the trouble shooting and have noticed that on the display it says LOFF all the time. I did find the test button on the motherboard for making sure the power supply was good and the tube fired when I pressed it. However when trying to run the tube doesn't fire. Is there a setting on the machine that removes the LOFF. I know it says if current is below 1.1ma it's considered off, however no matter what job I run the tube doesn't fire. Any and all help I'll be greatly appreciated.
It was working fine and half way through a raster project it quit. The tube stopped firing altogether I even tried a different job in vector cut and the tube doesn't fire. I walked through all the trouble shooting and have noticed that on the display it says LOFF all the time. I did find the test button on the motherboard for making sure the power supply was good and the tube fired when I pressed it. However when trying to run the tube doesn't fire. Is there a setting on the machine that removes the LOFF. I know it says if current is below 1.1ma it's considered off, however no matter what job I run the tube doesn't fire. Any and all help I'll be greatly appreciated.