PDA

View Full Version : Paying around with cermark glass colors



greg lindsey
05-15-2014, 11:18 PM
I had an opportunity to pick up some Cermark glass colors at a really discounted price from one of my distributors so I thought I'd give it a try. The results are actually surprising. This is just an old pic frame glass (hopefully the wife doesn't notice it missing) :eek: Anyways I noticed that the lower the power and decent speed some of it actually came out pretty well. Black, Green, Yellow and Red were used, no blue couldn't get the deal on that one. As you can see some additional playing around with it and I believe the results will get much better. I hadn't seen a lot of posts about this stuff so I thought I'd share this. These were done on 75w Epilog. Didn't like the red until I powered it down some more and it got much better. Lastly all were scrubbed with a scotch brite and all remained well. Ok should have been Playing around. LOL,