Media Cabinet in Cherry

[glenn bradley]

Another household item for myself. I got tired of discs, speakers and equipment lying around like unloved step children. Cherry with walnut accents. Oil/varnish blend finish. Over travel drawers hold 100's of discs and the fabric in the doors lets the remote control work.

289395

Walnut spline detail on breadboard ends. Also, walnet trim detail above and below doors and below drawers.

289394

Shop made pulls.

289396 . 289397

Fun with sap wood on the front stiles and feet.

289398

[Von Bickley]

Great looking cabinet and great craftsmanship......

[lowell holmes]

I agree with Von. Great looking original piece.

[Yonak Hawkins]

Excellent ! I love the handles and the splines.

[Prashun Patel]

Really sharp, Glen. Great work as usual. Those handles are a great idea. Nice nod to the Greene bros.

Not a big fan of the cardboard feet, though ;)

[glenn bradley]

Thanks guys. The speakers are crowding it and so have been moved. The little white thingy's under the feet are carpet spikes to keep it from sinking into the carpet until I find it's permanent spot. There are adjustable feet under each foot that will come into play.

[Jon Grider]

Nicely done, you did that pretty cherry justice. 2 questions, Is the whole piece solid cherry as it appears? And are those Polk 10's ?

[glenn bradley]

Nicely done, you did that pretty cherry justice. 2 questions, Is the whole piece solid cherry as it appears? And are those Polk 10's ?

It is all cherry except the walnut pulls and accents. Inside the carcass I did use two applied birch ply panels on the inside left and right sides to support the shelf pin for the shelf. I left these the natural light birch color (under shellac) to increase visibility on the rare occasions I need to poke around in there.

289674

[Jerry Olexa]

Very nice work, Glenn..Love the cherry.

[Kent A Bathurst]

Glen -

Nice.

Tell me how you deal with expansion of the top v breadboard in terms of the spline?

What is glued, what has elongated holes, where does the slippage/movement take place with respect to the spline?

Like the looks of that joinery detail - a lot.

'NUther one of your things I intend to steal, someday.

[George Bokros]

Very nice contrast and excellent workmanship.

[glenn bradley]

Glen -

Nice.

Tell me how you deal with expansion of the top v breadboard in terms of the spline?

What is glued, what has elongated holes, where does the slippage/movement take place with respect to the spline?

Like the looks of that joinery detail - a lot.

'NUther one of your things I intend to steal, someday.

The breadboard is pegged to a tongue at each end of the top panel from below in three places. The peg hole in the front is just slightly oversized, the middle and rear peg holes are short slots. This encourages the movement to be toward the rear which is open and will allow more than expected movement of the top. You can see the rear construction of this joint in this progress shot:

290456

To be on the safe side and assure a long and trouble free life the spline is glued to the top's tongue only. If the forward portion of the top were to expand or contract, the spline moves in the breadboard mortise. Here's a shot of one of the mortise pairs being worked. You can sort of see that the tongue extends well into the breadboard. The the thin remaining breadboard portions are recessed a bit further and the spline is glued to the edge of the tongue.

290446

I don't know that I described that well but, here's an x-ray diagram. the end result is that the spline moves with the top and is not attached to the breadboard.

290455

Here's a couple more shots of the completed piece showing the chatoyancy with a differing viewing and light angle. This characteristic makes the surfaces seem to ripple as you pass by. Kinda fun.

290445 . 290447

[Don Huffer]

Glen
Beautiful piece and finish. Excellent style and proportions. Cherry is so warm and rich looking. I use cherry quite a bit. I have a method of matching new pieces with old ones without stain if you ever need too. I have been making furniture for over 30 years so sometimes that salmon color needs a little help along the aging road to beauty to fit with other pieces in the room.

Don

[glenn bradley]

Glen
Beautiful piece and finish. Excellent style and proportions. Cherry is so warm and rich looking. I use cherry quite a bit. I have a method of matching new pieces with old ones without stain if you ever need too. I have been making furniture for over 30 years so sometimes that salmon color needs a little help along the aging road to beauty to fit with other pieces in the room.

Don

Thanks Don. I did 'sun tan' a few parts that were on the light side. I am always anxious to tap into any experience others have to offer. A post on your method would be helpful to me and any of our members working in cherry. I prefer to avoid colorants if possible so I would definitely appreciate hearing more about your methods :).

[Chad Robbins]

Nice piece you made!

[Jim Becker]

Beautiful work!