Installing a router lift on my unisaw

[Sam Beagle]

The title says it all. I have a 8-9 year old saw w 52 fence and out feed table. I would appreciate any help at all and where to even begin with getting the correct setup. I seen there is a extension table that bolts onto the left side as well. However I have a huge table to the right to work with. Thanks. Sam

[Sam Beagle]

I would like to use a woodpeckers lift, if that helps, but what else do I need and how is the installation.

[Myk Rian]

Cut the hole for the lift, and watch this video.

https://www.youtube.com/watch?v=XHbPfd2eu0o

[Sam Beagle]

Keep them coming. I also like the Incra setups. I ultimately would love to use the Incra fence system. They seem like the best out there.

[Brian Williamson]

I put a woodpecker lift in the right side MDF extension of my TS a couple years back and like the setup. The MDF isn't as nice as iron for the lift, but it works well enough and is easy to do and is easy on the pocketbook. Except for the lift. Those aren't exaclty free!