PDA

View Full Version : Source for good flat 1/8 or 1/3 wood?



Clark Pace
05-07-2014, 11:19 PM
Hi,

I stopped by home depot and lowes and their luan and other 1/4 wood is all warped. Anyone know of good source for this kind of stuff?

Bert Kemp
05-08-2014, 11:18 PM
Woodworkers Source (http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCkQFjAA&url=http%3A%2F%2Fwww.woodworkerssource.com%2F&ei=LUhsU5PJCJKxoQSt64GoAg&usg=AFQjCNHaHUBtDYcQglV5-9INZsSQsECvNQ&sig2=ZqrXfUMLQ6HAaY2Ri1RIbA&bvm=bv.66330100,d.cGU) has Baltic birch in 1/8 and 1/4, but to be honest any 1/8th plywood will have some warping. I take and put a heavy weight on it for a couple days that flattens it out pretty good, and remaining warp I use magnets to hole it flat on the table.

George M. Perzel
05-09-2014, 6:21 AM
Clark;
Check the Friends of the Creek thread for "thin wood".
Best Regards,
GeorgeL
aserarts

Mike Null
05-09-2014, 7:53 AM
Rules don't permit George to promote his business so I will offer a testimonial. I've used George's wood on several occasions and have always been pleased.