firewood made into an elegant box

[jwjerry w kowalski]

Here's a piece of maple burl I pulled out of the firewood pile that I thought was too nice to burn. It's about 6 in wide and 81/2 in tall. I put a ribbon finial on it to dress it up a bit, the ribbon finial I first saw was from Vinny Luciani in his postings and I copied that. It has walnut accents with a new type of finishing. I put 4 coats of danish oil on with 24 hrs between coats and then 3 coats of wipe on poly with 24 hrs. between coats. It gives a glass like finish that I really like. I think I got the finish idea from someone on the Sawmill creek posts. It's an easy finish if you don't mind waiting between coats. Here's a walnut box also with a cocobolo insert around the opening, with the same finish and it really shows off the glassy finish.288904288905288906288907288908

[Harry Robinette]

The first one is beautiful,but the second one is just awesome that is a really 100% turning,wood,shape,finish all awesome.

[Michelle Rich]

both are super nice. good job.

[Doug Reesor]

excellent work. I especially like the shape of the walnut piece

[robert baccus]

Really beautiful pieces wood, finish and even the little pointy things.

[Tom Borener]

Beautiful pieces, very sweet shapes, and you used the wood to good advantage. I usually shoot for elegant boxes and end up with firewood....

[jwjerry w kowalski]

Thanks everyone for kind comments and for looking.

[Doug Ladendorf]

The finial on the walnut box is beautifully shaped. Both very nice pieces.