View Full Version : drill press
ray hampton
04-24-2014, 8:10 PM
Do they make a cnc drill press that will drill to the center of a sheet of plywood
Rod Sheridan
04-25-2014, 3:08 PM
Do they make a cnc drill press that will drill to the center of a sheet of plywood
Sure, here's a photo of a typical one, looks like it could drill a hole anywhere on a sheet of plywood.
It probably also has a coffee maker option so you can have a cup of coffee while watching it drill holes.:D
288016
ray hampton
04-25-2014, 5:27 PM
NO COFFEE, I give coffee up with the other drinks , If this machine will cook my pinto beans then I want one , thanks
Joe Tilson
04-25-2014, 6:32 PM
Love them soup beans!
ray hampton
04-25-2014, 9:25 PM
Love them soup beans!
I am not any good at cooking except beans and corn bread
Brian Ashton
04-26-2014, 11:53 AM
Do they make a cnc drill press that will drill to the center of a sheet of plywood
Any cmc machine will drill anywhere and any size you tell it to, as long as you don't go outside it's parameters.
ray hampton
04-26-2014, 12:32 PM
Any cmc machine will drill anywhere and any size you tell it to, as long as you don't go outside it's parameters.
I knew that you must stay inside its parameters BUT do they made a drilling machine with 4x8 feet parameters
Art Mann
04-26-2014, 12:38 PM
CNC routers that will drill a hole anywhere within a 4 X 8 foot area are extremely common. You can buy them much larger than that. The truth is you can buy machines that will do almost anything within reason if you have enough money.
ray hampton
04-26-2014, 4:13 PM
thanks to everyone
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.