Roderick Gentry
04-13-2014, 12:36 AM
I have an Inca 10 inch, and just sold a second to someone else. I was wondering whether anyone has tried adaptors in 1" bore saw, like these:
http://www.ebay.com/itm/1-x-20-mm-Reducer-Bushing-Diamond-Blade-Concrete-Saw-/140887027243
There could be some risk of their coming out, as If the discs in the nut stack are concave. Maybe epoxy would work.
For 8"-10", and metric equivalents, who supplies the blades drilled 20mm. I am just boring them on my lathe as I need them, but I imagine I will get questions about this from time to time. Forrest makes a blade with 20mm bore, but the hassle with the old Inca 10" is that it really needs two blade sizes to be workable.
http://www.ebay.com/itm/1-x-20-mm-Reducer-Bushing-Diamond-Blade-Concrete-Saw-/140887027243
There could be some risk of their coming out, as If the discs in the nut stack are concave. Maybe epoxy would work.
For 8"-10", and metric equivalents, who supplies the blades drilled 20mm. I am just boring them on my lathe as I need them, but I imagine I will get questions about this from time to time. Forrest makes a blade with 20mm bore, but the hassle with the old Inca 10" is that it really needs two blade sizes to be workable.