I just got this in the mail today.

[Dennis Nagle]

They are the extra large jaws for my HTC125 chuck. Man, these things are heavy!!! Here are pix and the write up from the bay.


286952286953286954



Extra Large "Super" Dovetail Jaws
for the Hurricane HTC125 - 4 Jaw Scroll Chuck




This listing is for a set of "Extra" Large Dovetail jaws, which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck. These are possibly the heaviest jaws available for a standard 4 jaw chuck. They are suitable for 16" and larger bowls on a heavy full-size lathe.
They can be used in compression mode for gripping a tenon or expansion mode for internal holding within a dovetail recess.

Measurements:
Closed: 5" = interior, 6 7/8" = exterior
Open: 6 7/8 " = interior, 8 1/2 " = exterior

[Reed Gray]

I only noticed the Robust. Thought you splurged for new iron..... Well, steel.

robo hippy

[Dennis Nagle]

I really like the Robust but would never give up my Oliver!!!

[Steve Doerr]

Reeds not the only one to focus first on the Robust:D But you are right, those are some BIG jaws. So, what size tree are you going to be turning?

[Dennis Nagle]

I can turn 30" x 78". I was talking to the guy who got me into turning and he was telling me about a local guy who turns stuff that big. The turns the outside to shape, then cuts the log into 4 or 5 section, hollows each section, then glues them all together and does a finish turning. That sounds like fun to me☺