Need a service that resharpens old files

[Frederick Skelly]

1. Has anyone used Boggs Tool Processing in California? Would you recommend them?
2. Does anyone know another source you'd recommend?

I have two 12" flats that look like they are for wood inherited from a Grandfather. I also have a 10" mill file.

Thanks guys!
Fred

[Rick Whitehead]

Yes, I've used Boggs many times and been VERY pleased with the results on files, rasps and burrs.I highly recommend them.
There is another company that sharpens files: Save Edge-www.saveedge.com/index.html (http://www.sawmillcreek.org/www.saveedge.com/index.html), but I have no experience with them.
I'd go with Boggs.
Rick

[Prashun Patel]

I have. I recommend them.

[Tom M King]

Yes. Save Edge does a good job too.

[Tom M King]

Boggs is West coast, and Save Edge is East coast. Other than that, both good.

[Frederick Skelly]

Thanks guys. Ill choose one and move out on it. I appreciate your help!
Fred

[Tom M King]

They have minimum numbers. If you don't have enough, check with your local farrier for more to ship together.

[Frederick Skelly]

They have minimum numbers. If you don't have enough, check with your local farrier for more to ship together.

Will do. Thanks Tom!