Derek Cohen
03-30-2014, 11:52 AM
Several years ago I built a dovetail plane that shaped the male section of a sliding dovetail ...
http://www.inthewoodshop.com/Furniture/ArmoireProject1_html_252ed74a.jpg
Based on a derelict skew rebate plane, it wasn't much of a looker, but it got the job done.
http://www.inthewoodshop.com/ShopMadeTools/Evolving%20a%20Dovetail%20Plane_html_m25f1a6b4.jpg
The build pictorial is here: http://www.inthewoodshop.com/ShopMadeTools/Evolving%20a%20Dovetail%20Plane.html
About 18 months ago I bought a HNT Gordon dado plane, which is a superb performer and stunning looking plane. I was inspired to build another dovetail plane, this time one that planed the female/matching joint. I styled it to match the dado plane (on the right) ...
http://www.inthewoodshop.com/ShopMadeTools/PlaningTheSlidingDovetail_html_m1e10a6ef.jpg
Used together, they make a great team ..
http://www.inthewoodshop.com/ShopMadeTools/PlaningTheSlidingDovetail_html_33ac90ce.jpg
Build details are here: http://www.inthewoodshop.com/ShopMadeTools/PlaningTheSlidingDovetail.html
Now, in a couple of weeks I shall join Terry Gordon (HNT Gordon Planes), Colen Clenton and Chris Vesper (tool makers extrordinaire) at the LN Perth Tool Event, where I will be demonstrating making joints with hand tools. I decided that one of the joints I shall make will be the sliding dovetail. In addition to saw-and-chisel, I plan to use the dovetail planes.
That's when I looked at the dovetail plane and thought that it could do with a face lift. Well, a face lift that improved its functionality as well.
Targeted was the depth stop and the fence. In the original versions they required a hex key to adjust the bolts. This is a limitation - much better to be able to do so without a special tool.
The stained and tired beech body was stained Jarrah to match the other planes, and a bit of bling was added with brass. This is how it turned out ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D8_zps4ddcaba7.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D1_zpse204476b.jpg
Behind the depth stop is the nicker ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D3_zpsf3bd764b.jpg
The one-piece Jarrah fence has a brass face. This was very difficult to photograph and obtain an informative perspective ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D4_zps7e8c3455.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D7_zps5fe8115b.jpg
Here is the family shot ..
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D5_zps462807ed.jpg
Regards from Perth
Derek
http://www.inthewoodshop.com/Furniture/ArmoireProject1_html_252ed74a.jpg
Based on a derelict skew rebate plane, it wasn't much of a looker, but it got the job done.
http://www.inthewoodshop.com/ShopMadeTools/Evolving%20a%20Dovetail%20Plane_html_m25f1a6b4.jpg
The build pictorial is here: http://www.inthewoodshop.com/ShopMadeTools/Evolving%20a%20Dovetail%20Plane.html
About 18 months ago I bought a HNT Gordon dado plane, which is a superb performer and stunning looking plane. I was inspired to build another dovetail plane, this time one that planed the female/matching joint. I styled it to match the dado plane (on the right) ...
http://www.inthewoodshop.com/ShopMadeTools/PlaningTheSlidingDovetail_html_m1e10a6ef.jpg
Used together, they make a great team ..
http://www.inthewoodshop.com/ShopMadeTools/PlaningTheSlidingDovetail_html_33ac90ce.jpg
Build details are here: http://www.inthewoodshop.com/ShopMadeTools/PlaningTheSlidingDovetail.html
Now, in a couple of weeks I shall join Terry Gordon (HNT Gordon Planes), Colen Clenton and Chris Vesper (tool makers extrordinaire) at the LN Perth Tool Event, where I will be demonstrating making joints with hand tools. I decided that one of the joints I shall make will be the sliding dovetail. In addition to saw-and-chisel, I plan to use the dovetail planes.
That's when I looked at the dovetail plane and thought that it could do with a face lift. Well, a face lift that improved its functionality as well.
Targeted was the depth stop and the fence. In the original versions they required a hex key to adjust the bolts. This is a limitation - much better to be able to do so without a special tool.
The stained and tired beech body was stained Jarrah to match the other planes, and a bit of bling was added with brass. This is how it turned out ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D8_zps4ddcaba7.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D1_zpse204476b.jpg
Behind the depth stop is the nicker ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D3_zpsf3bd764b.jpg
The one-piece Jarrah fence has a brass face. This was very difficult to photograph and obtain an informative perspective ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D4_zps7e8c3455.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D7_zps5fe8115b.jpg
Here is the family shot ..
http://i13.photobucket.com/albums/a262/Derek50/Planes/Dovetail%20plane/D5_zps462807ed.jpg
Regards from Perth
Derek