George Bokros
03-19-2014, 6:11 PM
Just finished the apothecary cabinet for the wife. It is made from sugar pine with dovetailed soft maple drawers. Finish is Zar cherry stain with six coats General Finishes of Armr Seal poly. Inside is finished with Zinnser Seal Coat.
This was fun to build. Learned some new things, PC dovetail jig, the three panel drawer fronts.
Used Somerfelt tongue and groove system for attaching the face frame to the sides and the interior sub frames to the cabinet sides, utilized pocket hole screws for the interior sub frames and to attach the sub frames to the cabinet sides and face frame.
285127285128285129
The last picture is after it was place in its home on the foyer balcony so the railing obscures some of it.
George
This was fun to build. Learned some new things, PC dovetail jig, the three panel drawer fronts.
Used Somerfelt tongue and groove system for attaching the face frame to the sides and the interior sub frames to the cabinet sides, utilized pocket hole screws for the interior sub frames and to attach the sub frames to the cabinet sides and face frame.
285127285128285129
The last picture is after it was place in its home on the foyer balcony so the railing obscures some of it.
George