PDA

View Full Version : Watco Wipe-on Poly and Zinsser SealCoat



Ralph Barhorst
06-20-2005, 12:25 PM
I am in the process of finishing a dresser. I have already put on two coats of Zinsser SealCoat which is a dewaxed shellac. Getting ready to put on WATCO Wipe-On Poly. The WATCO can has this message:

"PREPARATION: For best adhesion, surfaces must be clean, dry and free of wax, grease, oil, shellac, lacquer, mildew, stearates and polishes."

Anyone ever use this combination to finish your project and is it really a problem?

Doug Shepard
06-20-2005, 12:27 PM
No problem. I'm sure the warning is there because most shellac is the waxed variety. I've used Minwax Wipe-on Poly over dewaxed shellac with no problems.

roy knapp
06-20-2005, 6:28 PM
Hi: doug is right the only thing that i would do is sand the project over with 220 grit and dust it down good first.:)