Bryan Cramer
03-14-2014, 12:44 PM
Is their any advantage to use a Japaneses veneer saw over a western one? Does anyone use one? I am in the market for a good veneer saw and there isn't much information in the web about these types of saws. I don't want to spend the $100 on a Garmacy saw so the Japanses saws fit the budget well at around $30. I understand the teeth are impulse hardened so it cant be resharpened.
Here is some of the saws I found: saw1 (http://www.thewoodworks.com.au/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=7108&category_id=803&option=com_virtuemart&Itemid=91&manufacturer_id=&vmcchk=1&Itemid=91) saw 2 (http://www.monstermarketplace.com/monster-woodshop/japanese-veneer-saw) saw 3 (http://store.mannyswoodworkersplace.com/1500102.html) They seem to be hard to find.
Any input would be appreciated.
Thanks
Bryan
Here is some of the saws I found: saw1 (http://www.thewoodworks.com.au/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=7108&category_id=803&option=com_virtuemart&Itemid=91&manufacturer_id=&vmcchk=1&Itemid=91) saw 2 (http://www.monstermarketplace.com/monster-woodshop/japanese-veneer-saw) saw 3 (http://store.mannyswoodworkersplace.com/1500102.html) They seem to be hard to find.
Any input would be appreciated.
Thanks
Bryan