Measurements Shenhui SH-G460 (Fit through a door?)

[Jacob Davalos]

Hello everyone.

I am looking into buying the Shenhui SH-G460. http://www.shenhuilaser.com.cn/produ...raver_460.html (http://www.shenhuilaser.com.cn/product/1702958401-50330522/60w_laser_engraver_460.html)
The measurements say it is 700 MM wide. This is about 28 inches. The reason I am so interested in measurement, is because I need it to fit through a door.

Is the base removable to make it even more "door friendly".

I am also worried about the door that does not fully enclose the engraving area, as I will be running this inside an office using this fume extractor:
http://www.quatro-air.com/sph400-las...r-marking.html (http://www.quatro-air.com/sph400-laser_laser-marking.html)

I am concerned that with the door not fully enclosed, it will render this $2,000 USD air purification system useless as vapors and odors will escape from the opening on the door.

Thanks in advance for all your answers, the forum support and experience with shenhui systems is pushing me ever closer to purchasing this machine.

[Rodne Gold]

You can unbolt the stand and get the laser in sideways with ease.

[Frank barry]

Hi I don't think they can be unbolted it might be an idea to ask Walt he has one it will pay to be sure before you get one cheers Frank

[Khalid Nazim]

You can unbolt the stand, remove the lid, side panels etc. See images below. Its quite simple.

284548284550284551

[Bob A Miller]

I can't speak directly to Shenshui, but I ordered my Gwieke from the factory built with a separate base that allowed me to move my 1290 sideways through doors.

Bob