Want to build a kiln

[Trevor Mills]

I want to build a dehumidifier kiln to handle apx 20-30 roughed out, 12"- 20" bowls at a time. The refrigeration designs aren't large enough and the only other plans I've found are for dimensional lumber, too big and not optimized for bowls.
I live in the damp Pacific Northwest, so think I'll pass on solar, but would consider ideas for outdoor or indoor kilns.
any and all design ideas would be appreciated.
thanks
Trevor

[Dave Schmittou]

Logosol makes a small unit (available at Baileys) It consists of the controller and a drying unit. You build the chamber out of foam board and I would guess you could configure it any way you wanted as long as you stayed in the same cu. ft. range. Just a thought.
Dave