Rhonda Lach
02-25-2014, 7:20 PM
I'm new here, so if I've come to the wrong place, let me know.
My question is I'm making some acrylic stamps to stamp into soap I make, I'm using epilog 600 mini, I have speed at 90 and power at 100...600 dpi,
the thing is my stamp seems to be lower on the sides and higher in the middle, which really doesn't work for me.
When I use lower settings it takes a couple hours to make one 2 x 2 inch stamp, which seems to be way too long.
any suggestions? the acrylic is 3/8" thick.
Thanks, Rhonda
My question is I'm making some acrylic stamps to stamp into soap I make, I'm using epilog 600 mini, I have speed at 90 and power at 100...600 dpi,
the thing is my stamp seems to be lower on the sides and higher in the middle, which really doesn't work for me.
When I use lower settings it takes a couple hours to make one 2 x 2 inch stamp, which seems to be way too long.
any suggestions? the acrylic is 3/8" thick.
Thanks, Rhonda