Jonathan Bowen
02-21-2014, 9:42 PM
So I'm currently looking at this tube to replace the 40 watt broken one that Hurricane is refusing to replace. It's losing power over time and generally being a pain in the butt. I'm also seeing current drops the longer it runs. So I can only cut about 30 mins before it needs to cool down a bit. It's frustrating. I am going to do another test to just check my sanity. I want to check the output from the controller and make sure that isn't doing weird stuff. The power supply is new.
I'm leaning towards this one.
http://www.lightobject.com/Quality-60W-CO2-Sealed-Laser-Tube-P70.aspx
Any other recommendations?
I'm leaning towards this one.
http://www.lightobject.com/Quality-60W-CO2-Sealed-Laser-Tube-P70.aspx
Any other recommendations?