Bob Johnson2
06-16-2005, 3:49 PM
Building my first cabinet that requires drawers and can find no info on how deep to go with the drawer in the cabinet and how long of a glide to use. For instance...
Figuring on using the concealed roller drawer slides from cshardware, the maesurement from the front of the face frame to the rear 1/4" panel is say 20.5". Do I order the next smaller size, as in 20"? Also when building the drawer how deep do you go, I'm guessing at about 3" short or 17" but that's just a guess.
I can find plenty of info on how wide and high you should go with a given slide but nothing on the lenght.
Do you get your slides before you build the drawers?
Thanks for any help.
Bob
Figuring on using the concealed roller drawer slides from cshardware, the maesurement from the front of the face frame to the rear 1/4" panel is say 20.5". Do I order the next smaller size, as in 20"? Also when building the drawer how deep do you go, I'm guessing at about 3" short or 17" but that's just a guess.
I can find plenty of info on how wide and high you should go with a given slide but nothing on the lenght.
Do you get your slides before you build the drawers?
Thanks for any help.
Bob