Michael Mayo
02-06-2014, 10:06 PM
I have a PC 7519 single speed router in my router table and I would like to be able to adjust the speed but with the soft start none of the after market speed gadgets will work. I have read that some guys have removed the soft start module to allow the use of a speed dial? Has anyone done this and if so can you give me some directions on what you did? I opened up the control box on the router and could see the wiring for the soft start module but I wasn't sure which wires needed to be disconnected etc. I could probably figure it out but I thought I would ask first in case someone has already done it and can give me some quick and dirty instructions. Thanks!