Bandsaw motor pulley

[Ed Edwards]

Hello,
I recently purchased an older Delta 14" bandsaw. It came without a motor. I have a 1hp 1725 rpm motor but I don't know what size the sheave/pulley should be.
If anyone could provide the diameter of the drive and the driven sheaves I would appriciate it.

Thank You,
Ed

[Rich Riddle]

According to the manual for the older 14" units, that sheeve is part number 41-033. That corresponds to a 2 3/4 OD - 5/8 B Ply pulley.

[Peter Kelly]

Louis Iturra sells machined cast iron replacement pulleys which are much nicer than the cast aluminum originals. Give him a ring (904) 642-2802.