View Full Version : Mesquite Wave Box
Eric Holmquist
01-28-2014, 4:41 PM
Mesquite Box with wavy joint. Around 4" (10 cm) tall. Finished with Bush Oil and polyurethane. This one was made before the rainbow version but the oil / poly finish takes longer to do.
http://farm4.staticflickr.com/3800/12195746394_485d7b100f.jpg (http://flic.kr/p/jzGovy)
Dennis Ford
01-28-2014, 8:37 PM
Nice box, love the joint.
Marc Himes
01-28-2014, 8:41 PM
Nice job Eric. Did you use an insert for the "tongue" portion of the lid?
Eric Holmquist
01-29-2014, 5:42 AM
Thanks
Nice job Eric. Did you use an insert for the "tongue" portion of the lid?
Yes, I normally use a piece of wood from the same blank just above the finial so that I can sort of get a grain match on the tenon, but in this case I messed up and had to re-make it from a piece of scrap. I got the basic idea from Kathy Marshall.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.