Ron Chapellaz
01-25-2014, 7:07 PM
Does anyone know if we can laser cut Gatorboard safely, or does it contain PVC?? If it doesn't contain PVC, what is it like to cut with? Does it give off a lot of smoke, does it catch fire, or melt etc...
It says it's made from polystyrene which should be safe to cut with right?? I want to make sure and not wreck my laser with this stuff. I've got a piece here to try but want to tread with caution and make sure this can be used with the laser.
Is it the same as foamboard?
Someone approached me with a piece to try and currently they get it router cut but would prefer to have more intricate cuts done if possible, which I'm hoping the laser will do. It is to be used for exterior signage.
Any input would be greatly appreciated! Thanks in advance!
It says it's made from polystyrene which should be safe to cut with right?? I want to make sure and not wreck my laser with this stuff. I've got a piece here to try but want to tread with caution and make sure this can be used with the laser.
Is it the same as foamboard?
Someone approached me with a piece to try and currently they get it router cut but would prefer to have more intricate cuts done if possible, which I'm hoping the laser will do. It is to be used for exterior signage.
Any input would be greatly appreciated! Thanks in advance!