PDA

View Full Version : stanley 113 types?



Joe Caff
01-13-2014, 5:39 PM
What are the different types (type 1, etc..) of Stanley #113's? Doing a little research.

Tom Meiller
01-13-2014, 6:22 PM
Not sure if this page from Sellin's book helps.

Joe Caff
01-13-2014, 6:27 PM
Helps quite a bit, thanks!

Mel Miller
01-13-2014, 8:55 PM
There are several different "types" of the Stanley 113. The best reference is a book Jeff Warner published in 2005. Walter's book is confusing. Sellens' book shows the main difference between earlier & later versions: - side wheel adjuster with screw cap, and lateral lever with lever cap.

don wilwol
01-14-2014, 2:10 PM
http://www.oldtooluser.com/TypeStudy/StanNo113cpTypestudy.htm

Mel Miller
01-14-2014, 5:12 PM
http://www.oldtooluser.com/TypeStudy/StanNo113cpTypestudy.htm

This "type study" just copies information from other researchers, and is incomplete. It lumps 3 different variations of the 113 into its' 1877-80 type 1 classification. For example: there is no mention of the coarse knurling on the side wheel, or the notch in the dovetail. Roger Smith mentioned these, and Jeff Warner further detailed these in his study which was approved by Roger Smith.

Joe Caff
01-18-2014, 8:51 AM
Thanks everyone for the help. Lots of good resources here.