simon harker
01-06-2014, 8:01 AM
Hello,
Thanks a lot to everybody for the help on my last thread.
I am now pleased to say that somehow (mainly thanks to help from dave) I have got my softdog working and it connects to the laser machine. I did download Lasercut from the chinese side of leetro's site also which seemed to have a positive affect.
However now I have reached some new problems. When I load laser cut it all works fine. I can move the head and test fire the laser.
I then create a simple shape, set it to cut on 100 power / 50% speed. Click download and go to download current and then something loads and I then press start on lasercut and it beeps on my machine saying dll version does not match firmware version and the same happens if i press start on the laser machine.
I ran a test and this is my results':
DLL Version: 4.1.2.2
Firmware Version: 4.3.0.5
hardware version 4.3.0.1
Does anybody know how I get a updated DLL Version to match the firmware and hardware. Also is it a problem that the firmware and hardware version do not match?
Thanks
Thanks a lot to everybody for the help on my last thread.
I am now pleased to say that somehow (mainly thanks to help from dave) I have got my softdog working and it connects to the laser machine. I did download Lasercut from the chinese side of leetro's site also which seemed to have a positive affect.
However now I have reached some new problems. When I load laser cut it all works fine. I can move the head and test fire the laser.
I then create a simple shape, set it to cut on 100 power / 50% speed. Click download and go to download current and then something loads and I then press start on lasercut and it beeps on my machine saying dll version does not match firmware version and the same happens if i press start on the laser machine.
I ran a test and this is my results':
DLL Version: 4.1.2.2
Firmware Version: 4.3.0.5
hardware version 4.3.0.1
Does anybody know how I get a updated DLL Version to match the firmware and hardware. Also is it a problem that the firmware and hardware version do not match?
Thanks